1,100+
antenna jobs completed across Perth’s north
Perth northern suburbs • TV antenna installation & repairs
We fix weak signal, dropouts and bad installs — and make every TV point work properly.
Every install is tested with a signal meter — not just “looks good on the TV”.
A lot of antenna issues we fix come from poor installs — wrong antenna, bad cabling, or no signal testing.
“Everything was labelled, neat and fully tested. Our office finally has fast, stable wired speed at every desk.”
Joondalup business owner — Google Review
1,100+
antenna jobs completed across Perth’s north
Same-week
service available
3 Years
workmanship warranty
Next available install
This weekPixelation, missing channels and drop-outs usually come down to poor hardware or bad cabling. We fix every part of the signal path so everything works properly.
We meter every multiplex against Perth’s broadcast map and pick gain profiles for Alkimos, Butler, Yanchep & Joondalup.
Stainless fixings, UV-safe coax and sealed penetrations survive sea spray and coastal winds.
Every TV point is balanced, labelled and scanned before we leave — no more weak bedrooms.
Need Starlink, Wi-Fi mesh or CCTV cabling tidied? We plan it during the same visit.
Signal levels
If your picture breaks up or drops out, it’s usually because signal levels aren’t balanced properly. We meter each multiplex and tune it to stay stable.
Coastal installs
Mindarie, Yanchep and Alkimos rooftops get tuned to shrug off gusty weather and sea spray.
Two-storey + multi-outlet homes
We leave enough headroom so multiple outlets stay balanced without overloading amplifiers or tuners.
Long cable runs
For 30m+ feeds we front-load gain so every bedroom outlet still sees clean margins.
We keep you in the 60–72 dBuV sweet spot so splitters, amplifiers and long runs all stay noise-free.
We test your signal and cabling properly to pinpoint what’s actually causing the problem.
Install, rewire or replace what’s needed — no shortcuts.
Every outlet is tested and tuned before we leave.
Service areas
We regularly fix antenna reception problems, replace damaged antennas and install new digital TV systems in Alkimos, Butler, Eglinton, Clarkson, Yanchep, Mindarie, Quinns Rocks, Joondalup and surrounding suburbs.
Alkimos, Eglinton, Butler, Quinns Rocks and Mindarie installs are tuned for salt air, wind exposure and long-term corrosion resistance.
In Clarkson, Ridgewood, Butler and Yanchep we repair weak TV signal, replace splitters and rebalance multi-point antenna systems.
We handle antenna repairs, outlet faults, wall plate issues and full digital antenna upgrades across Joondalup and nearby northern suburbs.
Installed antenna packages typically start at $299, with premium Australian-made options from $375. Final pricing depends on hardware choice, roof access and cabling requirements.
We run a signal and cabling test first. If your current antenna can be restored with a mast, connector or cable repair, we recommend repair before full replacement.
Most standard installs and repairs are completed in around 1 to 2 hours. Multi-outlet balancing, difficult roof access, or long cable runs can take longer.
Call 0493 819 163 or request a quote and we’ll check your signal, find the fault and fix it properly.
“Labelled, neat and fully tested — fast, stable wired speed at every desk.” Joondalup business owner · Google Review