320+
Starlink kits aligned in WA
Starlink installation • Perth northern suburbs
Starlink Installation, Roof Mounting & Wi-Fi Setup in Perth
We install Starlink Gen 3 systems on tin, tile and rural properties across Perth’s northern suburbs, handling roof mounts, conduit runs, cable routing and Wi-Fi optimisation so your connection is stable from day one.
$499 flat
Gen 3 install, sealing and activation included
28 ms
Average latency after tuning
Gen 3 install & activation
$499 flat
Complete install: roof mount, sealed entry, cable routing & Wi-Fi setup
- Correct mount selected for your roof — tin, tile, fascia or mast
- Line-of-sight testing before install to avoid dropouts
- Clean, concealed cabling — no messy runs or exposed wires
Performance snapshots
Every install is tested, measured and verified before we leave.
We don’t just install Starlink — we confirm obstruction clearance, test latency and map Wi-Fi coverage so you know your system is performing exactly as it should.
Mindarie coastal home
Latency reduced to 31 ms with stable 220 Mbps download after fascia mount and mesh Wi-Fi setup.
Wanneroo acreage
Custom 2.4 m mast cleared gum trees, bringing drop-outs from 12/day to zero.
Yanchep duplex
Internal conduit run kept cabling hidden while holding 210 Mbps through brick.
Customer feedback
“Cleanest Starlink install I’ve seen — no cables visible anywhere.”
– Yanchep homeowner
“Fast, tidy and fully explained setup. Our whole home Wi-Fi is finally stable.”
– Butler homeowner
Mount options
Starlink mount options and pricing for your roof type
Colorbond / Tin Roofs
Low-profile roof mount
Included in $499
- 4-point saddle mount with fully sealed penetrations
- UV-rated conduit run to internal connection point
- Installed to suit Australian roofing and weatherproofing standards
- Post-install speed and obstruction report provided
Tile Roofs
Ridge mount installation
$549
- Tile brackets with stainless steel fixings
- Lead flashing and weather-sealed penetrations
- Secure mounting aligned to roof structure
- Option to relocate dish in future if required
Rural / Obstructed Properties
2.4 m mast installation
$680
- Galvanised mast with full bracing system
- Guy wires and earthing installed to Australian standards
- Designed to clear trees and improve line-of-sight
- Obstruction scan and performance report included
All installations are completed using weather-rated materials and installed to suit Australian conditions. We ensure every mount is secure, sealed and built to last.
Cable & Wi-Fi packages
Keep your wiring clean and your Wi-Fi strong.
Clean cable runs
We plan every cable route before installation — using internal wall cavities, fascia conduit or ceiling spaces — so your Starlink system looks clean, protected and professionally finished. Pair this with our Wi-Fi upgrades for full-home coverage.
- External conduit colour matched
- Penetrations sealed with Dektite
- Data cabinet patching available
Wi-Fi optimisation
We integrate Starlink into your existing network or install a new system, ensuring strong, stable Wi-Fi coverage across your entire home without dropouts or dead zones.
- Mesh node placement + labelling
- Guest + IoT network setup
- Speed tests for every zone
Service areas
Starlink installation across Perth northern suburbs and rural surrounds.
We regularly install and optimise Starlink in Alkimos, Eglinton, Butler, Clarkson, Yanchep, Two Rocks, Mindarie, Joondalup, Wanneroo and rural properties where clean roof mounting and strong in-home Wi-Fi matter most.
Coastal installs
Alkimos, Eglinton, Butler and Two Rocks jobs are built for coastal wind, salt air and exposed rooflines with sealed penetrations and weather-rated hardware.
Family homes
In Clarkson, Mindarie, Butler and Joondalup we combine Starlink setup with mesh Wi-Fi tuning so the connection reaches bedrooms, offices and smart TVs properly.
Rural properties
For Yanchep hinterland, Gingin and larger blocks, we plan mast height, obstruction clearance and long cable routes to keep Starlink stable in difficult locations.
How we install
A proven installation process for reliable performance
-
01
Site survey + LOS scan
We assess obstructions, roof structure and the best cable path before installation begins.
-
02
Mount + conduit run
Your Starlink system is securely mounted, sealed and routed using professional-grade hardware.
-
03
Activation + optimisation
We activate, optimise and test your system — including speed checks and Wi-Fi performance throughout the home.
Common questions
Starlink installation and roof mount questions we get every week.
Do you mount Starlink on tin or tile roofs?
Yes. We carry specific brackets for Colorbond tin, concrete tile, Dektite and fascia mounts so the dish is secure regardless of roof type.
What does the Starlink installation fee cover?
Our $499 Gen 3 installation includes roof mounting, cable routing, weather-proof sealing, Gen 3 activation, Wi-Fi optimisation and speed validation.
Can you integrate Starlink with my existing Wi-Fi network?
We reconfigure your router or supply mesh hardware so Starlink backhaul feeds your existing network without double-NAT issues.
Ready for fast, reliable internet with Starlink?
Call us today or request a quote online. We’ll handle the full installation and leave you with a clean setup, strong Wi-Fi and a system that just works.